Waterfall Controller Replacement

IMPORTANT: SWITCH OFF ELECTRICAL SUPPLY BY DISCONNECTING THE PLUG AT THE SOCKET OR ISOLATION SWITCH. Please contact a qualified electrician if you need assistance or contact us at Canadian Spa

Step 1:  Remove cap cover to controller

Step 2: Unscrew valve from body

 Step 3: Make sure ‘O’ Ring is fitted

Step 4: Slide in new valve. the valve has 2 indents that match up to 2 ridges in the body. Tighten by hand.

Step 5: Push on cap/cover.

Step 6: Turn on electric/power supply to hot tub