Location of parts - Toronto SE spa 2024

Understanding your spa’s jet & parts system - ordering the correct replacements can be tricky, but here’s how you can identify the parts you need and their style:

To determine what style of jets you need for your Toronto SE Spa, here’s a step-by-step guide:

1. Identify the Jet Type

• Inspect Existing Jets: Remove one of your spa's jets by twisting it counter clockwise or pulling gently (depending on the type). Note the following:
  • Diameter: Measure the face of the jet.
  • Stem Design: Check the back end of the jet; this is where it connects to the jet body.
  • Material: Note whether the jet is plastic, stainless steel, or another material.
  • Spray Pattern: Observe the style of the water flow (e.g., rotating or directional).

2. Check the Spa’s Manual

• The Toronto SE Spa manual should include information about compatible jet styles and part numbers. If you don’t have the manual, check the manufacturer’s website or contact their customer support.

3. Consult the Manufacturer

• Who Made It? The Toronto SE Spa is associated with Canadian Spa Company. Reach out to them with your spa's serial number or model details for guidance on compatible parts.
• Jet Categories: Spa jets often fall into standard sizes like 2", 2.25", 3", 5", or other dimensions. Confirm the size and model with their support.

4. Locate Part Numbers

• Check parts guide: for location of each jet and part number - this will also give you a guide to other parts location (i.e. controllers, topside, UV Location, headrests etc..)

For a more closer look at the Parts layout - press on the picture

5. Replace and Test

• Once you have the new jets, replace one to confirm fit and functionality before fitting the full set using the location guide to help replace into the correct places.